Kyocera FS-C5025N Supplementary Manual page 32

Windows Printing: NetBEUI
4. In the left menu of the COMMAND CENTER, click NetBEUI/NetBIOS.
5. Complete each field. The fields are described below.
Item
NetBEUI Protocol
NetBIOS over
TCP/IP
Browse Master
Printer Name
Workgroup
Comment
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\windows_printi...
Figure 5. COMMAND CENTER NetBEUI/NetBIOS Settings Page
Description
Choose whether NetBEUI protocol is enabled (On) or disabled (Off).
Choose whether NetBIOS over TCP/IP is enabled (On) or disabled (Off).
When this option is selected, the print system changes to browse master,
and a workgroup is created in My Network. When the option is not selected,
the print system is added to an existing workgroup.
The printer and host names on the TCP/IP General tab (Protocols > TCP/IP >
General) are interrelated. If you want to change the NetBEUI printer name, change
the TCP/IP host name as well.
The printing workgroup is a workgroup shown in Entire Network in My Network. The
default workgroup name is "KM-NetPrinters."
You can enter a comment as desired. This field can also be left blank.
4/5 ページ
2006/05/26