Kyocera FS-C5025N Supplementary Manual page 82

Using a Web Browser to Manage the IB-23
User Name
Authentication Protocol
Authentication Password
Privacy Password
SNMPv1/v2c
Read Community
Write Community
sysContact
sysName
sysLocation
HP Web Jetadmin Compatibility
5-13. Management/E-mail > SNMP > Trap
If you are using the SNMP protocol and an error such as paper out occurs, the IB-23 generates a trap and sends it to the
trap recipients. You can setup two trap recipients. The setting details are the same for both recipients.
Item
Authentication Traps
Trap Community
Trap IP Address
Trap IPX Address
Selected Errors
5-14. Management/E-mail > Maintenance
A printer maintenance request mail can be sent periodically to a specified address.
Item
Equipment ID
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
Enter the username used by SNMPv3. Maximum of 32 single-byte characters.
You can choose between MD5 and SHA.
Enter the password for authentication. Enter between 8 and 32 single-byte
characters.
Enter the password for encryption. Enter between 8 and 32 single-byte
characters.
SNMPv1/v2c can be set to enabled (On), Read Only, or disabled (Off). Turn
SNMPv3 off if this setting is set to On.
This is used to read device information. The default read community string is
public. The correct read community needs to be entered for an administration
utility to send an SNMP request to read a value, otherwise the IB-23 will reject the
request.
This setting functions similarly to the read community setting except that it is used
for SNMP requests to write values.
This is the MIB-II sysContact object, which typically contains the email address of
the network administrator.
This is the MIB-II sysName object, which typically contains the host name or
domain name of the IB-23.
This is the MIB-II sysLocation object, which typically contains information about
the location of the IB-23.
Enables (On) or disables (Off) compatibility with HP Web Jetadmin.
Description
Enables (On) or disables (Off) the MIB-II EnableAuthenTrap object. If this setting
is enabled (On), an SNMP trap is generated if an attempt is made to read or write
using an invalid community string. The trap is sent to the contained trap address.
The SNMP trap community string used when the IB-23 generates a trap.
The IP address that receives traps.
The IPX address that receives traps.
Select the events that generate traps from Low Toner, Add Toner, Paper Jam,
Add Paper, Cover Open, and All Other Errors.
Description
You can specify any arbitrary number as the system ID number. Enter up to a
maximum of 15 single-byte characters.
16/19 ページ
2006/05/26