Macintosh Printing - Kyocera FS-C5025N Supplementary Manual

Troubleshooting
same network segment.
Following is an example of a Class C IP network with 3 computers and 1 IB-23:
Computer A
Computer B
Computer C
IB-23 printer
DHCP/BOOTP
The IP address changes unintentionally on my IB-23.
If the IB-23 received its IP address from a DHCP or BOOTP server, its lease may have expired and a new IP
address assigned. To assign the IP address to a particular printer, access the COMMAND CENTER (the IB-23's
internal webpage) and click Off-radio buttons in the DHCP and BOOTP. For more information, see the
DHCP section in Setting the IP Address Information.
To avoid unauthorized changes of the IB-23 settings, including from a browser, it is recommended that you define
an administrator password. To change the password from a web browser:
1. Launch a web browser.
2. In the address bar, enter the IP address assigned to the IB-23.
3. The web browser displays the IB-23 COMMAND CENTER. Click the Basic tab.
4. Click Security in the menu on the left side. The webpage for basic account settings is displayed.
5. If a password has been set, enter it.
6. Enter a new password.
7. Enter the same new password again to confirm it.
8. Click Submit.
Note: Note and retain the password.
NetBEUI vs. KPrint Port Printing
I frequently receive errors when printing with NetBEUI. Why?
Use of the NetBEUI protocol provides a convenient method for initial networking setup of the IB-23. However,
NetBEUI is not designed to manage timeouts while receiving print data. This may cause errors when the IB-23 is
receiving multiple print jobs.
In network environments supporting TCP/IP, create the KPrint Port for the printer connection and use peer-to-peer
printing. For instructions on creating the KPrint Port, refer to

Macintosh Printing

Printing fails with Macintosh.
Open the AppleTalk control panel from the Chooser. Make sure Ethernet is selected and the appropriate zone is
selected as the current zone.
If the red DATA indicator on the back of the IB-23 continues lighting, try adding the following command in the IB-23
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\troubleshoot....
192.168.40.1
192.168.40.2
192.168.40.10
192.168.40.20
Windows Printing - TCP/IP.
2/4 ページ
Using
2006/05/26