Printing From Applications - Kyocera Mita FS-1000 User Manual

2.2

Printing From Applications

This section uses a document created using Microsoft Word as an example
of how to print from applications.
When feeding from the paper cassette, do not insert paper into the MP
tray. Because the MP tray default setting is set to first mode (priority
printing from the MP tray), if there is paper inserted in the MP tray, the
Note
first paper will always feed from there. To change the MP tray's first mode
setting, send the PRESCRIBE FRPO T0 command to the printer from the
Remote Operation Panel utility. (See section 1.6.7.) For FRPO commands,
refer to the Programming Manual
the printer.
1
Set paper of the size specified for the document in the application
into the printer's paper cassette. (For details on how to set paper
sizes, refer to the
2
Set the paper size inserted into the paper cassette in the Remote
Operation Panel utility (see page 1-18). If paper size settings are not
the same, print may be incorrectly positioned.
3
Create the print document, then click File from the menu bar. Next,
click Print, and the Print dialog box will appear.
drop-down menu
Installation
Application
2-3
Printing From Applications
provided on the CD-ROM supplied with
Manual.)
Print dialog box