Kyocera Mita FS-1000 User Manual page 78

If the charger cleaner knob is not restored to its home position (marked
CLEANER HOME POSITION
of the page the next time you use the printer.
Note
5
After cleaning is done, put the process unit back in the printer. To do
so, carefully align the guides at both ends of the process unit with
the slots in the printer.
6
Close the front cover.
Front Cover
7
Close the top cover by pressing down on the front left and right
corners of the top cover.
Top Cover
), a black band will print along the length
3-8
Cleaning
Process Unit