Connecting The Remote Operation Panel Utility To The Printer - Kyocera Mita FS-1000 User Manual

1.3.2

Connecting the Remote Operation Panel Utility to the Printer

The Remote Operation Panel utility can be used whenever the printer is
connected to the computer via the parallel or serial interface or through a
network interface (TCP/IP or IPX/SPX). To establish the connection to the
printer, proceed as follows:
1
Click the CONNECT button on the start-up screen.
2
On the connection wizard:
a. Click Local Printer to connect to a locally attached printer.
b. Click Network Printer to connect to a network printer.
3
Depending on the connection type you have chosen above, follow the
instructions displayed by the wizard.
1-13
Configuring the Printer
Local Printer
Network Printer