Table of Contents
Advertisement
Configuring the Printer
1.3
Configuring the Printer
1.3.1
Basic Settings for the Remote Operation Panel
This section explains how to set and confirm the printer's configuration
from the Remote Operation Panel utility. The value set from the Remote
Operation Panel utility becomes the printer's default setting. However,
when printing, the printer may automatically switch to another setting,
depending on the application software or printer driver settings.
Before operating the Remote Operation Panel, you can change settings for
polling, error notification, and whether you want to use the 3D virtual
printer to monitor the printer status.
1
Click the SETUP button on the start-up screen.
2
The Remote Operation Panel appears. Read the follow explanations,
then make the appropriate settings.
Status Polling
1-10
Enable Traps
Browse NIC Web Page button
Polling
Advertisement
Table of Contents
