Ram Disk - Kyocera Mita FS-1000 User Manual

1.5.10 RAM disk

If the printer's total memory is more than 12 MB, you can use the
RAM disk function. RAM disk enables electronic sorting, which reduces the
overall amount of time required for printing. The default setting is Off.
• Data contained on the RAM disk is lost when the printer is reset or
the power is turned off.
• The RAM disk is set from the printer's user available memory. Print
Note
speed may be slowed or insufficient memory warnings may occur, if
the RAM disk size is inappropriate, or if the print data is too complex.
1
Click the MENU button on the start-up screen.
2
The Menu dialog box appears. Double click RAM disk mode. Using
the radio buttons on the right side of the screen, you can toggle
RAM disk mode On and Off.
1-35
Printer Environment
RAM disk mode