Remote Operation Panel Utility; Requirements; Installing The Remote Operation Panel - Kyocera Mita FS-1000 User Manual

Remote Operation Panel Utility

1.2 Remote Operation Panel Utility
1.2.1

Requirements

1.2.2

Installing the Remote Operation Panel

The Remote Operation Panel utility is provided on the Kyocera Mita
Digital Library CD-ROM supplied with the printer. You can install the
Remote Operation Panel on a computer that runs under Windows 95/98 or
Windows NT 4.0 operating systems, and use it to change basic printer
settings, monitor the current printer status, and display error messages
(such as paper jam warnings) on the computer screen.
The Remote Operation Panel utility is designed to run under Windows 95/98
or Windows NT 4.0 operating systems. With Windows 95/98 it can be used
with either local (parallel or serial) or network (TCP/IP or IPX/SPX)
connection. With Windows NT 4.0 it can only be used over a network.
• The Remote Operation Panel utility does not run under any other
operating systems.
• The Remote Operation Panel utility provided on the Kyocera Mita
Note
Digital Library CD-ROM supplied with the printer is for use only with
the Kyocera Mita FS-1000+ XL printer driver. Printing problems may
occur if it is used in combination with any other printer driver.
1
Insert the Kyocera Mita Digital Library CD-ROM supplied with the
printer into the CD-ROM drive of the computer.
After a few moments, the Kyocera Mita Digital Library main menu
appears. Click on Printer Utilities.
If this screen does not appear, click the Windows Start button and
select Run.
1-6