Kyocera Mita FS-1000 User Manual page 34

4
Click the " button next to the pull-down menu on the right side of
the screen. Select a paper thickness from Normal, Thick, and Thin.
Refer to the following table for standard paper weight settings:
Paper thickness setting
Thin
Normal (default setting)
Thick
5
To make the paper thickness settings for the MP Tray, double click
MP Tray and repeat the above procedure.
6
After you have selected a paper thickness, click the OK button to
return to the start-up screen. The paper source paper thickness
settings are changed.
Corresponding paper weight
Less than 64 g/m
64 to 90 g/m
(MP Tray only)
Greater than 90 g/m
Envelope (64 to 90 g/m
1-21
Paper type
2
2
Transparency
2
2
) [MP Tray only]
Paper