Hard Disk Format - Kyocera KM-C3225 Operation Manual

Hard Disk Format

Format the hard disk when disposing of the machine or the hard disk to
overwrite the hard disk data. See page 1-10 Format Function for further
details.
Important!
To avoid damaging the hard disk, do not turn the power off while formatting the
hard disk. If the formatting is not completed, there is a possibility of data being
recovered from the hard disk and information being leaked.
Note
• The Security Kit re-starts formatting the Hard Disk when power is turned of
and then on.
• If the optional hard disk is installed, the hard disk is also formatted.
1
Press the System Menu/Counter key.
2
Press the BOX Management key.
3 Use the numeric keys to enter the management code. The default setting is
25002500 for the 25/20 cpm model and 32003200 for the 32/25 and 32/32 cpm
models.
4 Press the On key under Format Hard Disk (on the right side of the touch
panel).
HDD management mode
HDD management mode
Check Hard Disk capacity
Check the free space and capacity
of the Hard Disk.
System Menu
5
When you prompted to confirm formatting, press the Yes key. Formatting
begins.
6 After formatting is completed, turn off the Main Switch and unplug the Power
Cord.
Format Hard Disk
Overwrite data on the Hard Disk.
Data cannot be restored.
On
Administrator Information
Close
On
1-17