Security Kit Installation Procedures - Kyocera KM-C3225 Operation Manual

Administrator Information

Security Kit Installation Procedures

Step 1: Preparation
Security Kit installation
The Security Kit is installed by service representative.
Precautions for Security Kit installation
• The repeat copy function becomes prohibited.
• The Delete Invalid Data menu is replaced by the Format Hard Disk menu.
• All original document data saved on the hard disk is overwritten.
Precautions for installing the security kit on a machine already in
production
After installing the Security Kit, you must format all hard disks.
Step 2: Changing the Management code
The management code must be entered to use the Security Kit. Changing the
management code prevents everyone except the administrator from using the
Security Kit. The management code is eight digits long when using security
mode.
Important!
Avoid using a management code that is easily guessed, such as 11111111 or
12345678.
Note
You can change the management code within the range of 00000000 to
99999999.
Be sure to use eight digits.
1 Press the System Menu/Counter key.
2
Press the Machine Default key.
3 Use the numeric keys to enter the management code. The default setting is
25002500 for the 25/20 cpm model and 32003200 for the 32/25 and 32/32 cpm
models.
4
Press
Change # key.
1-14
and keys to select Change Management Code and press