Ice Scraper Instruction; Purpose - Thermo Scientific TDE Series Manual

Ice Scraper Instruction

Purpose

The ice scraper is used to scrape any frost accumulated on
the cabinet breaker and other hard surfaces inside the
freezer.
It is recommended that the ice scraper is used every month
to obtain the best performance of the freezer.
To help minimize ice build-up, try to move samples in and out
as quickly as possible.
Informational Notice
The ice scraper should not be used as any other tool and for
any other purpose except for scraping hard surfaces.
Do not use the scraper as a tool to open the door before the
PEP time expires.(Uprights only).
Precautions and Usage
• Read the following instructions carefully, since they
provide useful safety information about installation, use
and maintenance to help avoid mishaps and possible
accidents.
• Remove the packing and make sure the scraper and
magnetic hook are in good condition.
• Do not use a damaged scraper as it may cause injury.
• Use the magnetic hook to hang the scraper on the unit
for convenience. The magnetic hook should be placed in
the recommended area on either side of the unit as
shown in Figure 2.
• Use the scraper provided with your equipment to scrape
the ice or frost formed on the cabinet breaker and other
hard surfaces inside the freezer.
• To prevent gasket damage, do not use the scraper on the
gasket.
• To remove the ice from the gasket, refer to the Gasket
Maintenance section.
CAUTION: Do not misuse the scraper for any
purpose other than the defined purpose.
Thermo Fisher Scientific ULT Freezers
CAUTION: The manufacturer cannot be
responsible for any damages deriving from
improper, wrong or incautious use.
Ice Scraper Instruction | 15