Table of Contents
Advertisement
Open the appliance door as little as possible during
operation.
¡ This maintains the temperature in the cooking com-
partment and eliminates the need for the appliance
to reheat.
When baking multiple dishes, do so in succession or
in parallel.
¡ The cooking compartment is heated after baking
the first dish. This reduces the baking time for the
second cake.
If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking time
ends.
¡ There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡ Accessories that are not being used do not need to
be heated.
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
1
Display
The display shows the current adjustment val-
ues, options or notes.
→ "Display", Page 9
2
Buttons
You can use the buttons to set various func-
tions directly.
→ "Buttons", Page 10
4.2 Display
The display is divided into different areas.
Status bar
The status bar is at the top of the display.
1
2
Familiarising yourself with your appliance en
Allow frozen food to defrost before cooking.
¡ This saves the energy that would otherwise be re-
quired to defrost it.
Switch off the display in the basic setting → Page 28.
¡ Energy is saved when the display is switched off.
Heat two glasses or cups of liquid at the same time.
¡ Heating several dishes at the same time requires
less energy than heating dishes one after the other.
Note:
The appliance requires:
¡ a maximum of 2 W in networked standby mode
¡ a maximum of 1 W when the appliance is not con-
nected to the network, with the display switched on
¡ a maximum of 0.5 W when the appliance is not con-
nected to the network, with the display switched off
You can carry out actions depending on the setting
step.
Symbol
Function
Go back one setting.
Open the basic settings.Open the basic
settings.
In addition to the text information, you can see the cur-
rent status of different functions using symbols.
Symbol
Meaning
Time, e.g.
Display of the current time-setting op-
"12min10s"
tions.
→ "Time-setting options", Page 17
Timer is activated.
→ "Setting the timer", Page 18
Childproof lock is activated.
→ "Childproof lock", Page 28
The appliance door is locked due to the
cleaning function or childproof lock.
→ "Cleaning function 'Pyrolytic active-
Clean'", Page 33
→ "Basic settings", Page 28
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no WiFi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 29
Remote start with Home Connect is ac-
tivated.
→ "Home Connect ", Page 29
Remote diagnostics with Home Con-
nect for maintenance is activated.
→ "Home Connect ", Page 29
, there
, there
9
Advertisement
Table of Contents
