Table of Contents
Advertisement
en Steaming
The appliance adds clouds of steam to the cooking
compartment for approx. 3 to 5 minutes. Depending on
the operation, you can activate the steam jet several
times.
You can add the steam jet for the following functions:
¡ Types of heating → Page 16
– 4D hot air
– Top/bottom heating
– Circulated air grilling
¡ Meat probe → Page 24
Note: Only use the steam jet when cooking compart-
ment temperatures are above 120 °C.
11.3 Setting the type of steam heating
Note:
Observe the instructions for the types of steam heating:
¡
Requirement: The water tank has been filled. If the wa-
ter tank runs dry during operation, a message appears
on the display. Operation is stopped.
→ "Filling the water tank", Page 19
1.
Press "Steam".
2.
Press the required type of steam heating.
3.
Set the temperature using the adjustment line or dir-
ectly via the number field
4.
Press "Cooking time".
A cooking time must always be set for types of
steam heating.
5.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "min" or second
display "s".
a The selected value is marked in blue.
6.
Set the cooking time using the adjustment line or
enter it directly via the number field
If required, use
to reset the setting value.
7.
Press "Start" to start the operation.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
8.
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
9.
Empty the water tank and dry the cooking compart-
ment.
→ "After using steam operation", Page 21
Changing the type of steam heating
When you change the type of steam heating, the other
settings are also reset.
1.
Press
.
2.
Press
.
3.
Press the required type of steam heating.
4.
Reset the operation and use
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
1.
Press the temperature.
2.
Change the temperature using the adjustment line
or enter it directly via the number field
20
.
.
to switch the ap-
to start.
.
3.
Press "Apply".
Changing the cooking time
You can change the cooking time at any time.
1.
Press the cooking time.
2.
Change the cooking time using the adjustment line
or enter it directly via the number field
3.
Press "Apply".
11.4 Setting added steam
Requirements
¡ Observe the information about the respective operat-
ing mode.
→ "Setting options with steam", Page 19
¡ The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. The appliance continues to operate but without
injecting steam into the cooking compartment.
→ "Filling the water tank", Page 19
1.
Press the operating mode that you require.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Press "Added Steam" .
4.
Press the required steam level.
Steam level
1
2
3
5.
Press "Start" to start the operation.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
6.
When the food is ready, use
ance off.
7.
Empty the water tank and dry the cooking compart-
ment.
→ "After using steam operation", Page 21
Changing added steam
You can change or deactivate the added steam func-
tion at any time.
1.
Press the steam level.
2.
Change or deactivate added steam.
3.
Press "Apply".
11.5 Setting the steam jet function
Requirements
¡ Observe the information about the respective operat-
ing mode.
→ "Setting options with steam", Page 19
¡ The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. Operation is stopped.
→ "Filling the water tank", Page 19
1.
Press the operating mode that you require.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Start the operation.
4.
Press "Steam jet"
a The appliance starts to heat the water.
5.
When the water is heated up, press "Steam jet"
again.
.
Added steam
Low
Medium
High
to switch the appli-
at the desired time.
Advertisement
Table of Contents
