®
Sure Cross
DX80 Performance Wireless I/O Networks
2.2 DX80 Gateway and Node Wiring Chamber
The DX80 Gateway and Node use the same housing and terminal block for wiring.
1. Housing—The rugged, industrial DX80 housing meets IEC IP67 standards.
2. Mounting hold, #10/M5 clearance—Mounting Holes accept metric M5 or UNC/UNF #10 hardware; DIN rail mount
adapter bracket available.
3. Wiring terminal strip—The 16 spring-clip type wiring terminals accept wire sizes: AWG 12-28 or 2.5 sq mm.
4. Port, PG-7 gland or blank—The PG-7 threaded ports can accept provided cable glands or blanks.
5. Ribbon connector—Ribbon cable connects wiring base to LCD/radio.
2.3 Dimensions
The DX80, DX83, and DX70 models all share the same housing and mounting hole dimensions.
2.3.1 Gateways and Nodes
All measurements are listed in millimeters, unless noted otherwise.
65.0
[2.56"]
60
[2.36"]
8
Figure 5. Wiring chamber of the Performance Gateway and Node
Figure 6. Dimensions for the Performance Gateway and Node
65.0
[2.56"]
7.65
[0.30"]
80.8
[3.18"]
120
[4.72"]
www.bannerengineering.com - Tel: + 1 888 373 6767
1
2
3
4
5
7.9
[0.31"]
30.65
[1.21"]
80.3
[3.16"]
19
[0.75"]
14.67
[0.578"]
22.2
[0.875"]
127
[5"]