Unlocking A Combination Memory; Setting Pistons - Rodgers Trillium T807 Owner's Manual

Swell Divisional
Pistons 1 – 5
General Pistons
1 – 10
Figure 2. Piston Locations.
A combination memory must be unlocked to set pistons. Once the pistons are set, the
combination memory may be locked again to prevent accidental change.

Unlocking a Combination Memory

1. Press and hold M1, M2, M3 or M4 located under the Swell manual to the right for
approximately five seconds.
USING INTERNAL MEMORY or USING CARD MEMORY appears in the Console Display
first. Then MEMORY (#) LOCKED or MEMORY (#) UNLOCKED appears. If MEMORY (#)
UNLOCKED appears, release the memory piston, otherwise continue with the next step.
2. While continuing to hold the memory piston, rotate the Alpha dial in either direction until the
Console Display reads MEMORY (#) UNLOCKED.
3. Release the memory piston. The memory is now unlocked.

Setting Pistons

1. Select a memory by pressing M1, M2, M3 or M4.
Toe Pistons Great Divisional
5 – 10 Pistons 1 – 5
3
Pedal Divisional
Pistons 1 – 5