Table of Contents
Advertisement
P
R
N
D
E136209
To exit SelectShift mode, return the
selector lever to drive (D).
When your vehicle is stationary, only the
1st and 2nd gears can be selected. Manual
shifting is sequential, therefore gears
cannot be skipped.
Emergency Park Position Release
Lever
WARNINGS
Do not drive your vehicle until you
verify that the brake lamps are
working.
When doing this procedure, you need
to take the transmission out of park
(P) which means your vehicle can
roll freely. To avoid unwanted vehicle
movement, always fully apply the parking
brake prior to doing this procedure. Use
wheels chocks if appropriate.
If the parking brake is fully released,
but the brake warning lamp remains
illuminated, the brakes may not be
working properly. Have your vehicle
checked as soon as possible.
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Transmission
-
S
+
Note: For some markets this feature is
disabled.
Your vehicle has a brake-shift interlock
feature that prevents moving the gearshift
lever from park (P) when the ignition is on
and you do not press the brake pedal.
The system requires service if you cannot
move the gearshift lever out of park (P)
with the ignition on and the brake pedal
pressed. It is possible that a fuse has blown
or your vehicle's brake lamps are not
operating properly. See Fuse
Specification Chart (page ?).
If the fuse is not blown and the brake
lamps are working properly, the following
procedure allows you to move the selector
lever from park (P):
Note: Apply the parking brake and switch
the ignition off before performing this
procedure.
E132721
1.
Lift up the cover in the center console
next to the transmission selector lever
with a suitable tool.
2. Push down the locking button in the
slot and simultaneously move the
selector lever out of park (P) and into
another gear.
94
Advertisement
Table of Contents
Troubleshooting
