Table of Contents
Advertisement
Issue
All songs can not be played
by voice commands.
Issue
System does not respond to
my voice.
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
SYNC
(If Equipped)
USB/Media Issues
Possible Cause(s)
Possible device malfunction.
Voice Command Issues
Possible Cause(s)
· You may be using the
wrong voice commands.
· You may be speaking too
soon or at the wrong time.
238
Possible Solution(s)
· The voice commands for
playing specified artist/
album/genre/title are
effective only for USB
devices. If your device
connected to SYNC via AUX
or bluetooth, these voice
commands are not effective.
Try resetting the SYNC
system, then try again.
Possible Solution(s)
· This could be due to the
ambient noise inside the
vehicle. Make sure that other
passengers in the vehicle are
not speaking at the same
time that the system is
listening. Also, extraneous
sounds, like wind noise,
could interfere with the
system recognizing voice
commands.
· You might be speaking too
soon or speaking when the
system isn't listening (for
example, during a prompt).
Make sure the system is in
listening state by verifying
that the icon "Listening" is in
the display before saying a
command to the system.
Advertisement
Table of Contents
Troubleshooting
