Table of Contents
Advertisement
Note: For optimum performance when
using any auxiliary device set the volume on
the device high. This reduces audio
interference when charging the device using
the vehicle power supply.
Note: For safety reasons, do not connect
or adjust the settings on your device while
your vehicle is moving.
USB PORT
Type 1
E133603
AUDIO TROUBLESHOOTING
Audio unit display
Please check CD
CD drive malfunction
CD drive high temp.
IPOD ERROR READING DEVICE
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Audio System
Type 2
E174600
The USB port allows you to plug in media
playing devices, memory sticks and charge
devices (if supported). See your SYNC
information.
General error message for CD fault conditions, such as
cannot read the CD, data-CD inserted, etc. Make sure
the disc is loaded correct way up. Clean and re-try, or
replace disc with known music disc. If error persists
contact your dealer.
General error message for CD fault conditions such as
possible mechanism fault.
Ambient temperature too hot – unit will not work until
it has cooled down.
General error message for iPod fault conditions, such
as cannot read the data. Ensure iPod is inserted
correctly. If error persists contact your dealer.
209
Rectification
Advertisement
Table of Contents
Troubleshooting
