Table of Contents
Advertisement
1
Delete the last input digit or character.
2
Delete all entered digits or characters.
Note: To exit dial mode, press and hold the
PHONE button or press MENU to go to the
Phone menu.
Note: "CALL" command is used to call a
phonebook contact and cannot be used to
enter the phone number.
Commands used when in a call
Press VOICE BUTTON and when prompted, say any of the following command
Making a call
Dialing a number using voice command
Press the VOICE BUTTON and when
prompted say:
Type 1
1.
"CALL <name>
MOBILE/HOME/WORK/OFFICE/OTHER".
2. If there are several numbers listed
under the desired category, choose the
line number by saying "LINE1/2/3".
Type 2
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
SYNC
"CLEAR"
"123" (one-two-three). "121" (one-two-one), etc.
"GO TO PRIVACY" / "GO TO HANDS FREE"
"HOLD CALL ON" / "HOLD CALL OFF"
"JOIN CALLS"
"MUTE CALL ON"
"UNMUTE CALL"
(If Equipped)
"DIAL"
2
Note: "DIAL" command is used to call by
entering a number and cannot be used for
a phonebook contact.
1.
"CALL <name>".
2. System will feedback "CALL <name>,
Is that correct?"
3. Say "YES".
4. System will ask "CALL <name>
mobile/home/work/office/other,
Is that correct?"
5. Based on the numbers shown in the
display, say
"MOBILE/HOME/WORK/OFFICE/OTHER".
6. If there are several numbers listed
under the desired category, choose the
line number by saying "LINE1/2/3".
Type 3
221
Advertisement
Table of Contents
Troubleshooting
