Ford RANGER 2012 Owner's Manual page 226

Hide thumbs Also See for RANGER 2012:
Table of Contents

Advertisement

Ongoing calls while entering and
exiting the vehicle
Note: Make sure the radio and Bluetooth®
mode are turned on.
SYNC provides uninterrupted connections
while entering or exiting your vehicle.
When entering the vehicle with an ongoing
call, the user needs to open the door, then
turn on the ignition, SYNC will search and
connect the phone automatically (if it has
been paired previously).
When exiting the vehicle with an ongoing
call, the user needs to turn off the ignition,
then open the door, the call will be
automatically transferred from SYNC to
the phone.
Text Messaging
WARNING
Local laws may prohibit some or all
of the text messaging functions while
driving. Check your local road rules
before using these functions.
Note: This is a phone-dependent feature.
If your phone is compatible, SYNC allows
you to receive, send, download and delete
text messages.
Note: Each text message will be sent with
the signature "This message was sent from
my Ford."
SYNC allows you to receive, send,
download and delete text messages. The
system can also read incoming text
messages so that driving the vehicle is not
disturbed.
Receiving a Text Message
When a new message arrives, an audible
tone sounds and the display indicates you
have a new message. You have these
options:
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
SYNC
(If Equipped)
Using voice command:
Wait till the new message notification
pop-up disappears, and then press the
VOICE BUTTON, wait for the prompt and
say "READ TEXT MESSAGE" to have SYNC
read the message to you.
Using menu options:
Press the button mapped to View or
Listen on the information and
entertainment display to view or listen the
new text message.
Reply to a message
1.
2. Press the up or down arrow buttons
3. Press the up or down arrow buttons to
4. Press the button mapped to More on
5. Press the up or down arrow buttons to
6. Press the up or down arrow buttons to
7.
8. Press the button mapped to Yes to
Forward a message
1.
2. Press the up or down arrow buttons
224
Press PHONE button.
until Text messaging is shown and
press OK button.
select the desired text messages and
press OK button.
the information and entertainment
display.
select Reply to sender and press OK
button.
select from the desired pre-defined
text messages and press OK button.
Press the button mapped to Send.
confirm.
Press PHONE button.
until Text messaging is shown and
press OK button.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents