Table of Contents
Advertisement
To adjust the preset volume:
•
Use the volume control to make the
necessary adjustment during an
incoming traffic announcement
broadcast. The display shows the level.
Ending Traffic Announcements
Note: If you press TA or TRAFFIC at any
other time it turns all announcements off.
The audio unit returns to normal operation
at the end of each traffic announcement.
To end the announcement prematurely,
press TA or TRAFFIC during the
announcement.
Automatic Volume Control
When available, automatic volume control
(AVC) adjusts the volume level to
compensate for engine noise and road
speed noise.
1.
Press MENU and select Audio or Audio
settings.
2. Select AVC LEVEL or Adaptive
volume.
3. Use the left or right arrow to adjust the
setting.
4. Press OK to confirm your selection.
5. Press MENU to return.
Digital Signal Processing (DSP)
DSP Occupancy
This feature takes into account the
differences in distance from the various
speakers in the vehicle to each seat. Select
the sitting position to set the best audio
enhancement.
DSP Equalizer
Select the music category that most suits
your listening preference. The audio output
changes to enhance the particular style of
music chosen.
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Audio System
Changing the DSP Settings
1.
Press MENU.
2. Select Audio or Audio settings.
3. Scroll to the required DSP function.
4. Use the up and down arrow to select
the required setting.
5. Press OK to confirm your selection.
6. Press MENU to return.
News Broadcasts
Your audio unit may interrupt normal
reception to broadcast news bulletins from
stations on the FM waveband, radio data
system (RDS) or other enhanced network
linked stations.
The display indicates there is an incoming
announcement, during news broadcasts.
When the audio unit interrupts for a news
broadcast, the preset volume level is the
same as traffic announcements.
1.
Press MENU.
2. Select Audio or Audio settings.
3. Scroll to News and press OK.
4. Press MENU to return.
Alternative Frequencies
The majority of programs that broadcast
on the FM waveband have a program
identification code. Audio units can
recognize that broadcast.
When your vehicle moves from one
transmission area to another with the
alternative frequencies tuning switched
on, this function searches for the strongest
station signal.
Under certain conditions, alternative
frequencies tuning may temporarily disrupt
normal reception.
196
Advertisement
Table of Contents
Troubleshooting
