Shipment; Troubleshooting - MSA Orion Operation Manual

Operating Manual Chapter 6, Warranty, Maintenance and Troubleshooting

Shipment

1. Remove battery pack before shipment. When returning the
Orion Multigas Detector for repairs, disconnect the normally
used battery pack from unit, and include it in the container.
2. Pack the Orion Multigas Detector in its original shipping
container with suitable padding. If the original container is
unavailable, an equivalent container may be substituted.
Seal instrument in a plastic bag to protect it from moisture.
Use sufficient padding to protect it from the rigors of
handling. Damage due to improper packaging or damage in
shipment is not covered by the instrument's warranty.

Troubleshooting

The Orion Multigas Detector will operate reliably for years when
cared for and maintained properly. If the instrument becomes
inoperative, follow the Troubleshooting Guidelines in TABLE 6-1;
these represent the most likely causes of a problem. You may
return inoperative instruments to MSA for repair.
• MSA Instrument Division
Repair and Service Department
1000 Cranberry Woods Drive
Cranberry Township, PA 16066-5207
1-800-MSA-INST
To contact MSA International, please call:
• 1-412-967-3000 or 1-800-MSA-7777
The instrument displays an error code if it detects a problem
during startup or operation. See TABLE 6-1 for a brief description
of the error and proper corrective action. When an inoperative
component is located by using the guidelines, it may be replaced
by using one of the following "Repair Procedures:"
6-7