Advertisement
1 Connect to PC, Internet, IED and Power
Step1. Connect PC and DNP3 slave (IED) to LAN1 of DNP-211
with Ethernet switch.
Step2. Provide +10 ~ +48 V
2 Execute DNP-211 Utility to set DNP-211
power to DNP-211.
DC
Step1. Input IP address and port
Step2. Configure Com port baud
Step3. Set DNP3 master ID and
to configure Modbus TCP
of DNP-211.
rate and data format of
DNP-211 (these setting
only for DNP3 485, if
useless,
please
care these Com port
setting).
Modbus
slave
DNP-211, and then select
DNP3 slave amount that
want to connect.
don't
ID
of
P2
Advertisement
