Configuration And Operation; Using The Configuration Wizard - Valeport VA500 Operating Manual

Altimeter

Hide thumbs Also See for VA500:

Table of Contents

Section 4 | Configuration and Operation

4 Configuration and Operation

The VA500 is supplied with a Valeport DataLog x2 and Terminal x2, setup and terminal

communications program and configuration tools designed specifically for use with Valeport

instruments.

Install the program by opening the install package supplied (or download from

https://valeport.download) and follow the on-screen instructions. Once installed, launch the

terminal program

Valeport Terminal can be used to manually connect and

configure the VA500 or can be used in the configuration

wizard mode.

Click on the configure button to launch the wizard.

Select the COM port the VA500 is connected to.

The wizard is configured with the default settings of the

unit but can be altered if the unit has been modified.

Default ASCII settings are pre-configured and should not

need changing.

Page | 6

Table of Contents