Download
Share
Print this page
Max SuperRoofer CN445R3 Operating And Maintenance Manual
  1. Manuals
  2. Brands
  3. Max Manuals
  4. Power Tool
  5. SuperRoofer CN445R3
  6. Operating and maintenance manual

Max SuperRoofer CN445R3 Operating And Maintenance Manual

Pneumatic roofing coil nailer
Hide thumbs

Advertisement

Quick Links

Download this manual
CN445R3
PNEUMATIC ROOFING COIL NAILER
DISPOSITIVO NEUMÁTICO DE CLAVETEADO
DE BOBINA DE TEJADO
CLOUEUR A BOBINE DE TOITURE PNEUMA-
TIQUE
OPERATING AND MAINTENANCE MANUAL
MANUEL D'UTILISATION ET D'ENTRETIEN
MANUAL DE OPERACIONES Y MANTENIMIENTO
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING
AVANT D'UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SÉCURITÉ AFIN DE
GARANTIR UN FONCTIONNEMENT SÛR.
CONSERVER CE MANUEL EN LIEU SÛR AVEC L'OUTIL AFIN DE POUVOIR LE CONSULTER UL-
TÉRIEUREMENT.
AVERTISSEMENT
ANTES DE UTILIZAR ESTA HERRAMIENTA, LEA DETENIDAMENTE ESTE MANUAL PARA FAMILIARIZARSE CON
LAS ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD.
CONSERVE ESTAS INSTRUCCIONES JUNTO CON LA HERRAMIENTA PARA FUTURAS CONSULTAS.
ADVERTENCIA

Advertisement

loading
Need help?

Need help?

Do you have a question about the SuperRoofer CN445R3 and is the answer not in the manual?

Questions and answers

Related Manuals for Max SuperRoofer CN445R3

Summary of Contents for Max SuperRoofer CN445R3

  • Page 1 CN445R3 PNEUMATIC ROOFING COIL NAILER DISPOSITIVO NEUMÁTICO DE CLAVETEADO DE BOBINA DE TEJADO CLOUEUR A BOBINE DE TOITURE PNEUMA- TIQUE OPERATING AND MAINTENANCE MANUAL MANUEL D'UTILISATION ET D'ENTRETIEN MANUAL DE OPERACIONES Y MANTENIMIENTO BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN- STRUCTIONS.
  • Page 2 INDEX INDEX ÍNDICE ENGLISH Page to 12 FRANÇAIS Page to 22 ESPAÑOL Page to 32 DEFINITIONS OF SIGNAL WORDS WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in mi- nor or moderate injury.

  • Page 3: Table Of Contents

    ENGLISH OPERATING AND MAINTENANCE MANUAL INDEX 1. GENERAL SAFETY WARNINGS ............3 2. SAFETY WARNING ................4 3. SPECIFICATIONS AND TECHNICAL DATA ........7 4. AIR SUPPLY AND CONNECTIONS............7 5. INSTRUCTIONS FOR OPERATION............8 6. MAINTAIN FOR PERFORMANCE ............12 7. STORING ...................12 8. TROUBLE SHOOTING/REPAIRS .............12 BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN- STRUCTIONS.

  • Page 4: Safety Warning

    Thinner Gasoline KEEP HANDS AND BODY AWAY FROM THE DIS- CHARGE OUTLET DO NOT OPERATE THE TOOL NEAR A FLAMMABLE When loading and using the tool, never place a hand or any SUBSTANCE part of body in fastener discharge area of the tool. It is very Never operate the tool near a flammable substance (e.g., dangerous to hit the hands or body by mistake.
  • Page 5 13. DO NOT DRIVE FASTENERS ON TOP OF OTHER FAS- DO NOT TOUCH THE TRIGGER UNLESS YOU INTEND TENERS TO DRIVE A FASTENER Driving fasteners on the top of other fasteners may cause Whenever the air supply is connected to the tool, never deflection fasteners which could cause injury.
  • Page 6  Keep the tool in a dry place out of reach of chil- dren when not in use.  Do not use the tool without Safety Warning label.  Do not modify the tool from original design or function without approval by MAX CO., LTD.

  • Page 7: Specifications And Technical Data

    3. SPECIFICATIONS AND TECHNI- APPLICATIONS  Fastening asphalt and fiberglass shingles CAL DATA  Siding installation  Fastening lath wire on the plywood  Wooden box assembly NAME OF PARTS 1 Frame 4. AIR SUPPLY AND CONNEC- 2 Cylinder Cap 3 Contact Arm TIONS 4 Nose...

  • Page 8: Instructions For Operation

    NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection. HOSES: Hose has a min. ID of 1/4" (6 mm) and max. length of no more than 17" (5 meters). The supply hose should contain a fitting that will provide "quick disconnecting"...
  • Page 9 NAIL LOADING Door latch Magazine cover Nail Feed pawl Door Nail loading: Open the magazine: Place a coil of nails over the post in the Magazine. Uncoil Pull down door latch and swing door open. Swing magazine enough nails to reach the Feed Pawl, and place the second cover open.
  • Page 10 Refer to the mark on the Contact Arm cover for direction to SHINGLE GAUGE turn the Adjustment dial. Deeper Shallower Shingle exposure Reconnect air supply. WARNING Deeper Shallower  ALWAYS disconnect the air supply before mak- ing adjustment. TRIGGER LOCK MECHANISM This gauge can be used to control shingle spacing.
  • Page 11 MODEL IDENTIFICATION CONTACT TRIP WITH ANTI-DOUBLE FIRE MECHANISM Identified by RED TRIGGER. CONTACT TRIP The common operating procedure on "Contact Trip" tools is for the operator to contact the work to actuate the trip mechanism while keeping the trigger pulled, thus driving a fastener each time the work is contacted.

  • Page 12: Maintain For Performance

    All quality tools will eventually require servicing or replace- ment of parts because of wear from the normal use. 8. TROUBLE SHOOTING/REPAIRS The troubleshooting and/or repairs shall be carried out only by the MAX CO., LTD. authorised distributors or by other specialists.
  • Page 13  Las características y la concepción de los productos mencionados en este manual están sujetas a modificaciones sin preaviso debido a nuestros esfuerzos continuos para mejorar la calidad de nuestros productos. 257 East 2nd Street Mineola, NY 11501, U.S.A. TEL: 1-800-223-4293 FAX: (516)741-3272 www.maxusacorp.com (USA Site) wis.max-ltd.co.jp/int/ (GLOBAL Site) 4100421 160318-00/01...