Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Kramer WP-120
Summary of Contents for Kramer WP-120
-
Page 1: User Manual
Kramer Electronics, Ltd. USER MANUAL Model: WP-120 XGA Line Receiver... -
Page 2: Table Of Contents
Figure 2: WP-120 XGA Line Receiver (Rear Side) Figure 3: CAT 5 PINOUT Tables Table 1: WP-120 XGA Line Receiver Features Table 2: WP-120 XGA Line Receiver (Rear Side) Features Table 3: CAT 5 PINOUT Table 4: Technical Specifications of the WP-120 Contents... -
Page 3: Introduction
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com 4 For example, the Kramer WP-110 or PT-110 5 Powering via the CAT5 cable from either the receiver or the transmitter is good for 50 meters. Above it, both sides should be fed with power Introduction that are clearly defined by function. -
Page 4: About The Power Connect Feature
(often associated with low quality cables) Avoiding interference from neighboring electrical appliances and positioning your WP-120 away from moisture, excessive sunlight and dust Caution Warning wall adapter that is provided with this unit Warning before installing or removing device or servicing unit. -
Page 5: Your Wp-120 Xga Line Receiver
Front panel (see section 4.1) Rear side (see section 4.2) 4.1 Your WP-120 XGA Line Receiver (Front Panel) Figure 1 and Table 1 define the front panel of the WP-120 XGA Line Receiver: Version for the UK and Europe Version for Belgium and Germany... -
Page 6: Your Wp-120 Xga Line Receiver (Rear Side)
4.2 Your WP-120 XGA Line Receiver (Rear Side) Figure 2 and Table 2 define the rear panel of the WP-120: Left Panel Figure 2: WP-120 XGA Line Receiver (Rear Side) Table 2: WP-120 XGA Line Receiver (Rear Side) Features Feature... -
Page 7: Installing The Wp-120 Xga Line Transmitter
2. Connect your 12V DC power supply to the POWER SUPPLY pins taking care that polarity is correct. 3. Insert the WP-120 directly into the wall box opening, and then mount the front panel securely using the screws. 4. Connect the XGA acceptor to the XGA OUT HD15F connector. -
Page 8: Technical Specifications
1 Specifications are subject to change without notice 2 For the Transmitter/Receiver pair 3 Excluding Belgium and Germany Technical Specifications of the WP-120 : 8.6cm x 3.8cm x 8.6cm (3.39" x 1.5" x 3.39", W, D, H) KRAMER: SIMPLE CREATIVE TECHNOLOGY... - Page 9 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 10 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the WP-120 and is the answer not in the manual?
Questions and answers