Wiring the TP RJ-45 Connectors Technical Specifications Figures Figure 1: WP-571 HDMI Line Transmitter US Front and Rear Panels Figure 2: WP-571 HDMI Line Transmitter EU Front and Rear Panels Figure 3: WP-572 HDMI Line Receiver US Front and Rear Panels...
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded...
Do not secure the cables in tight bundles or roll the slack into tight coils • Avoid interference from neighboring electrical appliances that may adversely influence signal quality • Position your Kramer WP-571 HDMI Line Transmitter and WP-572 HDMI Line Receiver away from moisture, excessive sunlight and dust WP-571/WP-572 - Getting Started...
HDMI ensures an all-digital rendering of video without the losses associated with analog interfaces and their unnecessary digital-to-analog conversions. It delivers the maximum high-definition image and sound quality in use today. Note that Kramer Electronics Limited is an HDMI Adopter and an HDCP Licensee. WP-571/WP-572 - Overview...
The High-Bandwidth Digital Content Protection (HDCP) standard developed by Intel, protects digital video and audio signals transmitted over DVI or HDMI connections between two HDCP-enabled devices to eliminate the reproduction of copyrighted material. To protect copyright holders (such as movie studios) from WP-571/WP-572 - Overview...
TP cable is still suitable for the video/audio transmission, but not for feeding the power at these distances If no input is connected to the WP-571, both the transmitter and receiver go into the power save mode automatically. When an input is connected to the WP-571, both devices go into the regular power on mode.
Defining the WP-571 and WP-572 Defining the WP-571 The Kramer WP-571 HDMI Line Transmitter accepts an HDMI signal, encodes it and transmits it over a TP cable to either the WP-572 or another DGKat compatible device. The WP-571 is available in the following versions: •...
The EU version is available in UK and Belgium sizes (see Section Figure 2 defines the front and rear panels of the WP-571. Figure 2: WP-571 HDMI Line Transmitter EU Front and Rear Panels Feature Function ON LED Indicates the following: •...
Defining the WP-572 The Kramer WP-572 HDMI Line Receiver accepts an encoded signal over TP cable from the WP-571 (or any other DGKat compatible transmitter), decodes it and converts it to an HDMI output. The WP-572 is available in the following versions: •...
Connect to the DGKat transmitter using DGKat cable (see Section Connector Earth Terminal Optional—connect to the common ground 2-pin Power Terminal Connect to the supplied 12V DC power adapter (see Section 3.3) Block WP-571/WP-572 - Defining the WP-571 and WP-572...
Always switch off the power to any device before connecting it to your WP-571 or WP-572. After connecting your WP-571 and WP-572, connect the power to either one or both the WP-571 and WP-572 and then switch on the power to each device.
To connect the WP-571 and WP-572 as illustrated in the example in Figure 1. Connect the RJ-45 connector on the rear panel of the WP-571 to the RJ-45 connector on the rear panel of the WP-572. See Section 3.4 for cable requirements.
8.04cm x 4.5cm x 8.04cm (3.17" x 1.77" x 3.17") W, D, H WEIGHT: 0.08kg (0.18lbs) approx. ACCESSORIES: 1 Power supply per device OPTIONS: Kramer BC-DGKat524 (CAT 5 24 AWG), BC-DGKat623 (CAT 6 23 AWG) and BC-DGKat7a23 (CAT 7a 23 AWG) cables WP-571/WP-572 - Technical Specifications...
Page 16
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...