Related Manuals for Kramer PT-110xl
Summary of Contents for Kramer PT-110xl
- Page 1 K R A ME R E LE CT R O N IC S L TD . USER MANUAL MODELS: PT-110xl, UXGA Line Transmitter WP-110, XGA Line Transmitter PT-120, XGA Line Receiver TP-120, XGA Line Receiver P/N: 2900-300313 Rev 1...
-
Page 3: Table Of Contents
Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Technical Specifications Figures Figure 1: PT-110xl UXGA Line Transmitter Figure 2: Connecting the PT-110xl UXGA Line Transmitter Figure 3: WP-110 XGA Line Transmitter Figure 4: Connecting the WP-110 to a TP-120 Figure 5: PT-120 XGA Line Receiver... -
Page 4: Introduction
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Products. Thank you for purchasing the Kramer PT-110xl UXGA Line Transmitter, WP-110 XGA Line Transmitter, Kramer Pico TOOLS PT-120 XGA Line Receiver, and/or Kramer TOOLS TP-120 XGA Line Receiver, which are ideal for: ... -
Page 5: Getting Started
Achieving the Best Performance To achieve the best performance: Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) ... -
Page 6: Recycling Kramer Products
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. -
Page 7: Pt-110Xl Uxga Line Transmitter
PT-110xl UXGA Line Transmitter The Kramer Pico TOOLS PT-110xl is an extended range UXGA line transmitter that receives a UXGA signal and transmits it over a CAT 5/6 cable to the PT-120 or TP-120 receiver. In particular, the PT-110xl features: ... -
Page 8: Connecting The Pt-110Xl Uxga Line Transmitter
LED stops flashing and lights solid. Note: If the status LED flashes quickly for a few seconds and then stays on solid, the PT-110xl could not capture the EDID and loaded the default EDID instead. PT-110xl, WP-110, PT-120, TP-120 - PT-110xl UXGA Line Transmitter... -
Page 9: Loading The Default Edid
Loading the Default EDID To load the default EDID: Press the EDID capture button. The EDID status LED flashes quickly for a few seconds and then stays on solid. PT-110xl, WP-110, PT-120, TP-120 - PT-110xl UXGA Line Transmitter... -
Page 10: Wp-110 Xga Line Transmitter
WP-110 XGA Line Transmitter The Kramer Wall Plate WP-110 is an XGA line transmitter that receives an XGA signal and transmits it over a CAT 5 cable to the PT-120 or TP-120 receiver. The WP-110 is available in three versions: one for USA, one for Belgium and Germany, and one for UK and most of Europe (excluding Belgium and Germany).
Need help?
Do you have a question about the PT-110xl and is the answer not in the manual?
Questions and answers