Advertisement
Quick Links
Ver. 2.1
Dundalk LeisureCraft
Western Red Cedar Indoor Cabin Sauna
Assembly Instructions
Please read and understand the complete instructions prior to assembly and use of your sauna. Customer agrees not to hold
Dundalk LeisureCraft Inc. and any of its authorized dealers liable for improper installation, maintenance and repair of this product
Requirements:
* 2 People (recommended)
*Rubber Mallet
*Carpenter's Hammer
*6' Step Ladder
*Cordless Drill (we supply the bit)
*Hammer
*7/16" Wrench
*Tape Measure
View the assembly process on
Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisurecraft.com
Advertisement
Related Manuals for Dundalk LeisureCraft Western Red Cedar Indoor Cabin Sauna
Summary of Contents for Dundalk LeisureCraft Western Red Cedar Indoor Cabin Sauna
- Page 1 Please read and understand the complete instructions prior to assembly and use of your sauna. Customer agrees not to hold Dundalk LeisureCraft Inc. and any of its authorized dealers liable for improper installation, maintenance and repair of this product Requirements:...
- Page 2 Dundalk LeisureCraft Cedar Indoor Cabin Sauna Assembly Instructions Start by deciding where you would like your indoor cabin sauna to be placed. Locating it over a moisture-sensitive surface such as hardwood or engineered flooring is not recommended as there could be some spillage of water from time to time, and heat and humidity over time could have an adverse effect on certain flooring materials.
- Page 3 Dundalk LeisureCraft Cedar Indoor Cabin Sauna Assembly Instructions 4. After the first layer of wall boards has been assembled, begin placing the short boards on the front side of the sauna to frame the door. Note, as always, rabbeted sides face inward.
- Page 4 Dundalk LeisureCraft Cedar Indoor Cabin Sauna Assembly Instructions 5. Benches: The height of the benches is up to you. Most people like the lower benches about 16-18” from the wooden sauna floor (Duck Boards) and the top bench a similar distance above the lower one. First, lay down the duck boards.
- Page 5 Dundalk LeisureCraft Cedar Indoor Cabin Sauna Assembly Instructions Fig. 6.3 Fig. 6.4: Ceiling supports on top wall board assemblies Installing washer and nut. (4 corners) 7. Heater Installation: This next step requires qualified electrician to install the wiring according to the manufacturer’s instructions.
- Page 6 Dundalk LeisureCraft Cedar Indoor Cabin Sauna Assembly Instructions 8. Insert the ceiling panel(s) to rest on supports. Secure at corners and mid-sides with supplied 2½” screws if desired. Fig. 8.2 Fig. 8.1 9. Attach the towel pegs where you want them.
- Page 7 Dundalk LeisureCraft Cedar Indoor Cabin Sauna Assembly Instructions 11. Install the moulding on the corners of the sauna with supplied screws in 4 places per side (every fifth board or so). Avoid cracks. See Fig. 11.2 Important note on aligning wall corners: Before securing the corner moulding assemblies (Fig.
- Page 8 Congratulations on the assembly of your new Cedar Indoor Cabin Sauna ! For assistance in the assembly of your cedar indoor cabin sauna please visit our support page at: https://www.dundalkleisurecraft.com/support/ Or to view the assembly process got to: https://www.youtube.com/watch?v=67c-o20fKCo Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisurecraft.com...
-
Page 9: Warranty
7. Do NOT use commercial wood sealers from local lumberyards or hardware stores. These are not designed to withstand the sauna temperatures or humidity! 8. Contact your local dealer or Dundalk LeisureCraft directly if you have questions or concerns regarding your product.
Need help?
Do you have a question about the Western Red Cedar Indoor Cabin Sauna and is the answer not in the manual?
Questions and answers