Dundalk LeisureCraft Cedar Pod Sauna Assembly Instructions

Dundalk LeisureCraft

Cedar Pod Sauna Assembly Instructions

Start the assembly of the signature benches by laying

out the bench brackets.

Place Signature bench on bench supports.

Place the 4 seat brackets under the benches lined up

with the curved seat support bracket on bottom of

bench.

Screwing from the bottom up into the seat support

bracket, use 3 – 2 ½" (64mm) screws to secure the

seat bracket to the bench

ph: 519-923-9813 | info@dundalkleisurecraft.com| web: www.dundalkleisurecraft.com

Table of Contents

Need help?

Do you have a question about the Cedar Pod Sauna and is the answer not in the manual?

Page 1 Dundalk LeisureCraft Cedar Pod Sauna Assembly Instructions Start the assembly of the signature benches by laying out the bench brackets. Place Signature bench on bench supports. Place the 4 seat brackets under the benches lined up with the curved seat support bracket on bottom of bench.
Page 2 Dundalk LeisureCraft Cedar Pod Sauna Assembly Instructions Using 2 ½” (64mm) screws, fasten the bottom of each seat bracket to the floor of the pod sauna. Place the back rest in groove on the bench bracket. Screw the back rest into the front and back walls with a 2 ½”...
Page 3 Dundalk LeisureCraft Cedar Pod Sauna Assembly Instructions Slide the front enclosure into bench. Secure the front enclosure to the walls using 2 ½” (64mm) screws. Screw between seat slats to make screws less visible. Repeat for opposite side bench. ph: 519-923-9813 | info@dundalkleisurecraft.com| web: www.dundalkleisurecraft.com...