Reload A Measuring File; Stop Settings Between The Measurements - novomatics Turbitronic P Operation Manual

Novomatics Manual
9.

Reload a measuring file

The WinTurbi software uses a binary format for measuring results.
1) Go to Window/New 2D-diagram.
2) Click the right mouse button, Add Curve ...
3) Add the measurement of your choice
4) Modify axes, colors, etc by clicking right mouse button, Content ...
10.

Stop settings between the measurements

Best practice is to keep the measuring chamber on low temperature between the
measurements. Further starting the stirrer before the next test starts.
Go to Measurement/Turbitronic/Stops Conditions ...
Figure 12 Stop Conditions
Turbitronic P
18