Table of Contents
Advertisement
Novomatics Manual
12.
Operation modes
In accordance with the practical requirements of modern quality management systems two
operation modes were implemented into the instrument. The first mode called Prod-Mode
includes a limited function set only and is intended for the quality control generally. The second
mode called Lab Mode allows the access to the complete function set and is intended for the
laboratory control or to adjust the Prod Mode.
After switching on the actual mode is displayed in temperature display for two seconds. The
following table gives an overview about each function set:
program choose
run a measurement
check the last 20
measurement data
Editing user programs
set time and date
turbidity calibration
Table 2 Overview function sets
LAB-mode:
This mode is providing free entry to all functions without any limitation. One can set the
temperature profiles, rotation speeds and turbidity levels according to the individual demands.
Up to 8 menus can be stored and retrieved so that these can be used for particular samples that
need different parameters.
Prod-mode:
This mode is meant for production control applications of the CHEMOTRONIC. In the quality
assurance mode, only 1 standard is active and can be started. The upper row of push buttons
on the front panel is inactive in this mode.
12.1. Change the operation mode
1) Press Sel button twice for entering into edit menu
2) Press up/down button till the actual mode OP Lab or OP Prod is blinking.
3) Press enter button for enabling mode change
4) Press up/down button for mode change and acknowledge by enter button
Prod mode
no
(standard prog)
yes
yes
no
no
no
Lab mode
yes
yes
yes
yes
yes
yes
Turbitronic P
22
Advertisement
Table of Contents
