Safety; Safety Precautions - novomatics Turbitronic P Operation Manual

Novomatics Manual
Read this chapter carefully before the
instrument will be taken into operation

1. Safety

Read operation manual before starting to work with the instrument. Make sure, that every
operator fully understands every function of the instrument and each of its components.

1.1.Safety precautions

1. Before connecting the Turbitronic P to the power supply:
Ensure that the MAINS switch at the front panel is in off position

 Ensure that the power voltage of your mains socket corresponds to the power volt-
age of the instrument
Ensure that the power cable plug is connected only to a power socket that has a

protective earth contact. This applies equally, if an extension cable is used: the cable
must contain an earth conductor!
2. To effect grounding of the instrument case, the power plug must be inserted before
connections are made to a computer or printer. The power plug must remain con-
nected until all other units have been connected or disconnected.
3. Any interruption of the ground connection (inside or outside the instrument) is pro-
hibited.
4. The instrument must be disconnected from all voltage source before it is opened for
any adjustment, replacement or repair. The manufacturer does not take any re-
sponsibility for any adjustments, maintenance by the user. Consult NOVOMATICS or
your distributor, if repairs seem to be necessary.
Turbitronic P
3