Novomatics Manual
4.2.
WinTurbi Software installation
There are two packages needed for instrument operation. Before starting make sure that the
instrument is off and the USB cable is not connected to the computer.
4.2.1. Installation of WinTurbi software from USB flash drive
1. Insert the USB flash drive to install WinTurbi software
2. Start the program winturbisetup.exe
3. Follow the default adjustments by pressing Next
Installation of WinTurbi software from Internet
1. Visit:
http://www.novomatics.de/downloads/
2. Login in with username and password
3. New users please fill out the registration request to receive login details
4. Download winturbisetup.exe
4. After downloading from Novomatics server start the program winturbisetup.exe
manually
5. Follow the default adjustments by pressing Next
6. The WinTurbi will be installed, USB driver is placed at {install path}\driver, for
example:
c:\program files\novomatics\winturbi\driver
Installation of Turbitronic P device driver
1) USB Driver installation
Please note WinTurbi operation is fully verified for Windows 10 only.
Execute CDM21224_Setup.exe as administrator found on your WinTurbi CDROM
or within your WinTurbi installation path.
Figure 1 Setup Executable Run as administrator
Turbitronic P
8