Table of Contents
Advertisement
Novomatics Operation Manual
7.
Data evaluation
7.1.
Principles of data saving
WinAlphaTack saves all measured data within a measuring files with the extension *.res.
During a test all relevant data are saved within the file {install path}\last.res. After the test
you are requested entering a name for data saving within a separate file. The file name is
suggested by the sample name you entered before.
Independent on this the measured data can be saved manually by pressing File/Save
Online As... and entering you new file name. This has to be done before a next test is
initialized; otherwise the measured data are lost.
7.2.
Loading result into results diagraphs
Open a new result window by pressing Window\New Result\Process. Press the right
mouse button over it and press Content... Select one ore more measuring files which have
to be inserted into this diagraph. Please note that the complete diagraph (axes, colors,
content) can be saved by pressing File\Save and reloaded by pressing File\Open
Diagram... or File\Recent Diagrams.
Figure 13
7.3.
Measuring reports
WinAlphaTack contains a reporting interface to MS Word. A mask file (standard: {install
path}\repmaskalpha1.dot) is filled automatically with measuring relevant data and saved
using the name of the measuring file but with the extension *.doc.
Usually MS Word should be started before creating a report. Than there are three ways
creating a report file. Firstly the operator is requested doing it at the end of test. Secondly it
is possible within the Content dialog of a result window (see picture above). Thirdly press
AlphaTackPlus
23
Advertisement
Table of Contents
