Advertisement
2.
Hold the cleaning pad by its tab and place the white side
against the orange roller closest to the green felt strip. Align
the center rib of the cleaning pad with the triangle on the green
felt strip.
3.
Keep the white side of the pad touching the orange roller
closest to the green felt strip as you press the pad forward and
down into the slot under the green felt strip (fig. 2.17). It's in
place when it clips securely into the slot with the white pad
touching the orange roller.
Fig. 2.17 Install the Cleaning Pad (front view)
CAUTION: The $1000 fuser unit will be damaged if the cleaning
pad is not replaced each time the oil bottle is replaced. This type of
damage is not covered under warranty or service contract. Both
parts are included in the same kit.
I n i t i a l P r i n t e r S e t u p
Chapter 2
2 - 2 5
Advertisement
