Access The Sensor; Access With Wi-Fi - Milesight VS132 User Manual

 Powered by DC Power Adapter
 Powered by a PoE Switch
 Powered by a PoE Injector

4. Access the Sensor

VS132 sensor provides user-friendly web GUI for configuration and users can access it via Wi-Fi
connection or Ethernet port. The recommended browsers are Internet Explorer, Firefox, Chrome,
Microsoft Edge, and Safari. The default IP of Ethernet port is 192.168.5.220, the default IP of
Wi-Fi is 192.168.1.1, and default SSID is People Counter_XXXXXX.
Note: The default information can be found on the label.

4.1 Access with Wi-Fi

Step 1: Power on the device.
Step 2: Enable the Wireless Network Connection on your computer and search for corresponding
access point, then connect computer to this access point.
Step 3: Open the Browser and type 192.168.1.1 to access the web GUI.
Step 4: Select the language.
Step 5: Users need to set the password and three security questions when using the sensor for
the first time (three questions can be skipped by refreshing webpage). After configuration, log in
with username (admin) and custom password.
Note:
1) Password must be 8 to 16 characters long, which contains at least two kinds or more in
combination with numbers, lowercase letters, uppercase letters and special characters .
2) You can click the "forgot password" in login page to reset the password by answering three
security questions when you forget the password if you set the security questions in advance.
7