Installing Accessories; Introduction; Antistatic Protection - Konica Minolta Magicolor 2430 DL User Manual

Introduction

Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
Dual In-Line
Memory Module
(DIMM)
Duplex Option
Tray 2
Dust Cover
Note
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.

Antistatic Protection

Note
Before opening and handling the dual in-line memory module (DIMM),
first touch a metal part of the printer to avoid an electrostatic charge
building up. When the DIMM is taken out of its conductive bag, hold it
by its edges to avoid touching the electronic circuits. When handling
the DIMM, be sure to place it on an anti-static mat or a piece of
aluminum foil.
116
This chapter provides information about the following accessories.
64 MB, 128 MB, 256 MB, or 512 MB DIMM (Unbuf-
fered NonECC)
Auto duplexing
500-sheet tray included
The dust cover is a standard printer feature in the
Americas, but an optional accessory in other areas.
For details on the available options, refer to
printer.konicaminolta.com.
Introduction