Solving Other Problems - Konica Minolta Magicolor 2430 DL User Manual

Solving Other Problems

To order KONICA MINOLTA consumables, go to www.q-shop.com.
Symptom
Printer
power is not
on.
The control
panel dis-
plays
TONER
much
LOW
sooner than
expected.
You can't
print the con-
figuration
page.
Images
cannot be
printed from
the digital
camera.
Solving Other Problems
Cause
The power cord is not
correctly plugged into
the outlet.
Something is wrong
with the outlet con-
nected to the printer.
The power switch is
not correctly turned
on (I position).
The printer is con-
nected to an outlet
with a voltage or fre-
quency that does not
match the printer
specifications.
One of the toner car-
tridges may be defec-
tive.
You printed with
heavy toner cover-
age.
The tray is empty.
The printer's covers
aren't closed
securely.
There is a media
misfeed.
The digital camera
transfer mode is not
set to the PictBridge.
The printer only
supports a Pict-
Bridge com-
pliant digital
camera.
Solution
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
Turn the power switch off (O position),
then turn it back to the on (I position).
Use a power source with the specifica-
tions listed in appendix A, "Technical
Specifications."
Remove the toner cartridges and check
for damage. If it is damaged, replace it.
See specifications in Appendix A.
Check that at least Tray 1 is loaded
with media, in place, and secure.
Make sure the covers are closed
securely. Close all covers gently to
avoid jarring the printer.
Clear the media misfeed.
Set the digital camera transfer mode to
PictBridge.
99