Konica Minolta Magicolor 2430 DL User Manual page 116

Symptom
Line art does
not print in
color.
The color
has a poor
reproduction
or has poor
color density.
If the problem is not resolved, even after all of the above have been per-
formed, contact Technical Support with the error information.
For contact information, refer to the General Information Guide.
108
Cause
The line art setting for
2400 x 600 dpi
requires Color Match-
ing to be turned off.
The drum cartridge
may be defective.
Solving Problems with Printing Quality
Solution
In the driver, go to Properties/Quality
and choose Off in the Color Matching.
Lower the resolution to 1200 x 600 or
600 x 600 dpi.
Remove the drum cartridge and check
for damage. If it is damaged, replace it.