QMS 2425 Reference page 90

The PCL 5E menu maintains PCL 5e emulation attributes such as
default font, symbol set, and point size. There are ten configuration
settings. See appendix C "Document Option Commands," for updated
information on the PCL 5e emulation DOCs.
Sets the printer's default font.
Menu Administration/Emulations/PCL 5E/Default Font
Choices Courier12, Courier12bold, Courier12italic, Courier10,
Courier10bold, Courier10italic, Lineprinter, Times*,
Times*Italic, Times*Bold, Times*BldItalic, Univ*,
Univ*Italic, Univ*Bold, Univ*BldItalic, Univcond*,
Univcond*Italic, Univcond*Bold, Univcond*BldItlc,
Select By Index
Courier12
Default
Notes Fonts with an asterisk "*" in their names are scalable.
Their default point size is set by the Point Size X100
option. Choosing Select By Index as the default font
selects the font by the index number printed on the
advanced status page and is set through the
Administration/Emulation/PCL 5E/Default Font Idx
menu.
»
All courier fonts (Courier10 and Courier12) and
Lineprinter are bitmap fonts, so they have a fixed point
size. Selecting a bound, bitmap font overrides the
default settings for symbol set and point size. An
unbound font uses the specified default symbol set if
possible, and a scalable font uses the default font size.
Note: You must used the Select By Index value
to select an Intellifont.