QMS 2425 Reference page 48

The Operator Control menu contains the following selections:
Selection See this section...
Accounting "Accounting Menu" on page 4-15
Chain "Chaining Media Inputbins" on page 4-37
Inputbins
Collation "Collation" on page 4-32
Copies "Copies" on page 4-35
Duplex "Duplexing" on page 4-44
Inputbin "Media Input" on page 4-35
Multipurpose "Selecting Media Size" on page 4-43
Sz
Envelope Size "Selecting Envelope Size" on page 4-43
Orientation "Media Orientation" on page 4-40
Outputbin "Media Output" on page 4-40
Output "Output Finishing" on page 4-45
Finishing
Note
Only when optional Stackler is installed
Crown printer-based accounting, a tool to help you keep track of the
use of printer resources, is available on your QMS 2425/2425 TURBO
Print System with a hard disk installed, with or without a network con-
nection.
Paper use is the most commonly monitored resource. However,
Crown accounting also allows you to monitor the following resources.
» Note: This option is available only when you
have an optional hard disk installed.
» Note: This option is available only when you
have an optional duplexer installed.