Enables (and identifies an end-of-job sequence) or disables data
stream sensing for the end-of-document (EOD) command.
Menu
Administration/Communications/Parallel/End Job Mode
None—The printer recognizes only the PostScript ^D
Choices
command.
QMS EOD—The printer recognizes only the QMS
%%EndOfDocument command.
HP EOD—The printer recognizes only the HP
<ESC>%12345X command.
Default
None
See chapter 5, "Additional Technical Information," for
Notes
details on how to implement this feature on your QMS
2425/2425 TURBO Print System.
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously.
Administration/Communications/Parallel/Def Job Prio
Menu
Choices
001-100 (highest-lowest priority)
001 (highest priority)
Default
Notes
For example, you can give jobs received via the parallel
interface priority over jobs received via the Ethernet
interface.