QMS 2425 Reference page 74

While you can usually specify the orientation of a print job in your
application, if you consistently use a certain media orientation, you
can set this in the Operator Control/Orientation menu.
Operator Control/Orientation
Menu
Choices Portrait—Vertical
Landscape—Horizontal
Default Portrait
An option in the Operator Control menu allows you to select the
default outputbin (tray). You can choose to have media exit the printer
at either the upper bin or the face-up bin with standard unit.
Operator Control/Outputbin
Menu
Choices Upper
Face-up
Top-stack (optional)
Center-stack (optional)
Bottom-stack (optional)
Upper
Default
The Top-Stack, Center-Stack, and Bottom-Stack
Note
options appear only if an optional stackler is installed
The Administration/Engine/Outputbin menu is used to name output
bins 1 -5. You can also use this name with QMS Document Option
Commands (DOCs). (See the QMS Crown Document Option Com-
mands manual for complete information on DOCs).