Table of Contents
Advertisement
Features
IP connections and serial connections supported
IP connections
z Up to 200 remote cameras *
(switching hub).
z The unit's auto IP setting function can be used to automatically
assign and control the IP addresses of the remote cameras *
* 1: Supported cameras:
AW‑HE35, AW‑HE38, AW‑HE40, AW‑HE42, AW‑HN38, AW‑HN40,
AW‑UE70, AW‑UN70
z One remote camera can be simultaneously controlled from up to
5 units.
Serial connections
z Up to 5 remote cameras can be connected.
Supported remote cameras
z Integrated Camera
z
AW‑HE35, AW‑HE38, AW‑HE40, AW‑HE42, AW‑HN38, AW‑HN40,
AW‑UE70, AW‑UN70
For details, visit the following website.
https://pro‑av.panasonic.net/
can be controlled via a network hub
1
Easy to operate the remote cameras
z The unit is equipped with dedicated levers, buttons, and dials for
performing pan, tilt, zoom, and focus operations. Also, it has a
control to adjust the speed of pan, tilt and zoom.
Camera angle adjustment can be performed quickly and reliably.
1
.
z The unit is equipped with an AWB button and ABB button for
executing automatic adjustment of the white balance and black
balance.
z Rapid call up operations are available for shooting environments
that frequently use presets.
Also, the speed at which a remote camera moves to a preset
position (PRESET SPEED) can be memorized for each preset
number of the unit. Thus, a remote camera can be operated at a
different speed depending on the preset number in accordance with
operation, enabling various image directing.
z The unit is equipped with PoE*
power supply cabling.
Connecting the unit to a network device that supports the PoE
standard (IEEE802.3af compliant)*
supply cabling on the unit.
Notes
z If both an external DC power supply and a PoE power supply
z
are connected, the power supply from the external DC
power supply will be used. If the external DC power supply is
disconnected from a state where both power supplies were
connected, the unit will restart automatically.
z Use a category 5e cable or higher for the PoE connection. The
z
maximum cable length for the connection between the power
supply device and the unit is 100 m (328.1 ft). Using a cable
that is category 5 or lower may result in decreased power
supply performance.
z When a personal computer that supports Gigabit Ethernet and
z
a PoE injector are connected via a straight LAN cable, the
unit may not be recognized by the personal computer. In such
cases, connect the unit to the personal computer via a cross
cable (or cross connection).
*2: Power over Ethernet. Referred to as "PoE" in this manual.
*3: For details on PoE power supply devices for which operation has
been verified, consult your local dealer.
9
2
, eliminating the need for additional
3
eliminates the need for power
Advertisement
Table of Contents
