Panasonic AW-RP60GJS Operating Instructions Manual page 78

Setup Software
(continued)
Displaying the [User Auth.] tab
Perform user authentication settings for the connection destination remote camera.
Cameras can be set individually or all at once.
1
2
3
4
1 Camera number
Select the camera number for which user authentication is to be set.
Settings are made all at once if [ALL] is selected.
When a camera number is selected, the settings can be made for each camera number individually.
2 New User Name
Set an ID to connect the camera which will be registered as a new camera.
3 New Password
Set a password to connect the camera which will be registered as a new camera. The password is displayed as "*".
4 Retype New Password
To check, the same password as entered in [New Password] is typed. The password is displayed as "*".
5 SET button
Reflects the set data to AW‑RP60.
5
78