Panasonic AW-RP60GJS Operating Instructions Manual page 16

Connections
(continued)
„ IP connections for multiple units and remote cameras
„
AW‑UE70
LAN cables
(Straight cable or cross cable)
Max. 100 m (328 ft)
External DC
power supply
Remote camera controller
AW‑RP60
*1: The AC adaptor is not shown in the above figure.
*2: Power can also be supplied to the AW‑RP60 from a PoE supported switching hub, PoE injector, PoE+ supported switching hub, or PoE+
injector.
z Use a category 5e cable for the LAN cable.
z One remote camera can be simultaneously controlled from up to 5 units. (When IP connection)
„ IP connection for one unit and one remote camera
„
External DC
power supply
z Use a cross cable (category 5e cable) for the LAN cable.
z When connecting to any camera other than an AW‑UE70, refer to the operating instructions for the camera.
AC adaptor
External DC External DC
power supply power supply
Remote camera controller Remote camera controller
AW‑RP60
AW‑UE70 *
PoE+ supported switching hub or
PoE+ injector *
External DC
power supply
Remote camera controller
AW‑RP60
AW‑UE70
LAN cable (Cross cable)
Max. 100 m (328 ft)
Remote camera controller
AW‑RP60
16
1
2
External DC
power supply
Remote camera controller
AW‑RP60 AW‑RP60
AC adaptor