Table of Contents
Advertisement
Menu
(continued)
Item
Initial setting
USER1
I.S.
USER2
ND1
USER3
ND2
USER4
ND3
USER5
ND4
USER6
D.EXT
USER7
D.ZOOM
USER8
FREEZE.D
It is possible to allocate the following functions to the user buttons.
POWER OFF:
Power off function
ND1, ND2, ND3, ND4:
ND1 to ND4 functions
FREEZE.D:
Freeze during function
D.ZOOM:
Digital zoom function
D.EXT:
D.EXT (OFF/×1.4) function
D‑EXT×2.0:
D.EXT (OFF/×2.0) function
(This feature is available when connected to a camera
for business applications that is equipped with the
double digital extender function.)
CROP SW:
Crop SW On/Off function (This feature is available
when connected to a camera for business applications
that is equipped with the CROP function.)
C.OT YL, C.OT G, C.OT MG:
YL, G, MG selection in Crop Out (This feature is
available when connected to a camera for business
applications that is equipped with the CROP function.)
C.AJ YL, C.AJ G, C.AJ MG:
YL, G, MG selection in Crop Adjust (This feature is
available when connected to a camera for business
applications that is equipped with the CROP function.)
C.MK YL, C.MK G, C.MK MG:
YL, G, MG selection in Crop Marker (This feature is
available when connected to a camera for business
applications that is equipped with the CROP function.)
WIPER:
Wiper selection (This feature is available when
connected to a camera for business applications that is
equipped with the WIPER function.)
Setting details
D. HAZE:
D.HAZE CLR SW On/Off function (This feature is
available when connected to a camera for business
applications that is equipped with the D.HAZE function.)
DEFROSTER:
Defroster On/Off function (This feature is available
when connected to a camera for business applications
that is equipped with the DEFROSTER function.)
HEATER:
Heater On/Off function (This feature is available when
connected to a camera for business applications that is
equipped with the HEATER function.)
FAN:
Fan On/Off function
WASHER:
Washer On/Off function (This feature is available when
connected to a camera for business applications that is
equipped with the WASHER function.)
CAM LOCK:
CAM LOCK setting/cancel function (This feature is
available when connected to a camera for business
applications that is equipped with the CAM LOCK
function.)
TRACKING:
Tracking On/Off function
TR CNCT:
TR CONNECT On/Off function
SCENE1, SCENE2, SCENE3, SCENE4:
SCENE1 to SCENE4 allocation
SHOOTING:
Shooting mode (NORMAL/H.SENSE) function (This
feature is available when connected to a camera
for business applications that is equipped with the
SHOOTING function.)
I.S. :
Camera I.S. function ON/OFF
I.S.Ext :
Use this to enable the second setting level when there
is a setting value for a second level on a camera for
business applications, rather than an ON/OFF setting
for the function.
Refer to the operating instructions for the models that
support this.
47
Advertisement
Table of Contents
